Resource Library

SimSolid Drives Down Analysis Time at Don-Bur

Truck trailer manufacturer, Don-Bur, discuss the challenges its engineering team was having with simulation in SolidWorks, and how a move to SimSolid has cut its simulation time from hours to a just few minutes.

Video Testimonials

The Multiphysics Optimization Platform for e-Motor Innovation

Altair develops multiphysics simulation technologies that allow you to accelerate next generation mobility solutions development. From smart control design to powertrain electrification and vehicle architecture studies, our solutions enable optimi...

Videos

Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Us...

Customer Stories, Customer Testimonials

A Unique Car Concept for Urban Space

Udi Meridor, Chief Innovation Officer at Israeli startup, City Transformer, talks about the thinking behind the design of this revolutionary design for urban transport. They have decided to rethink the future of the city car and create a cleaner ...

Customer Stories, Videos

スマートプラグで充電器業界にイノベーション - Altairスタートアッププログラム

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Smart Plug for Startup: Gulplug Drives Innovation in the Charging Industry with Altair's Startup Program

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Gulplug Drives Innovation in the Charging Industry with Altair's Startup Program

Xavier Pain, Founder & CEO at Gulplug, discusses how Altair's Startup Program enabled his team create an autonomous magnetic based charging solution for electric vehicles.

Customer Testimonials

Simulation, 3D Printing and Casting: The Perfect Symbiosis for Large Aerospace Structures

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...

Video Testimonials

What’s the Secret to Product Innovation?

Find out how we can help increase your innovation intelligence™ in order to grow, expand and succeed.

Videos

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials

Honeywell Aerospace - Reducing the Weight of Aircraft Engines

Brian Cottrell, Chief of Structures at Honeywell Aerospace, discusses how Altair ProductDesign applied HyperWorks' optimization technology, OptiStruct, to minimize the weight of new aircraft engines.

Videos

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials

RUAG Space Builds Reliable Satellites with HyperWorks

“Throughput time” or “Time to Market” is a key element for spacecraft structure. Structures are the first element required to start the integration of the spacecraft and it is essential that they can be delivered in time. However, late inputs requ...

Videos

Phil Hall from Caterham Composites Discusses a Composite Optimization for a Racing Yacht

Phil Hall, Managing Director of Caterham Composites, discusses some of the challenges involved in the design and manufacture of carbon fiber composites for the automotive and aerospace markets. During the interview, Phil reveals details of a joint...

Videos

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials

Interview with Richard Slade on the EADS Astrium ExoMars Project

This interview with Richard Slade from EADS Astrium gives an insight into the ExoMars Space exploration project. Richard discusses the goals of the project and some of the engineering challenges faced when designing the landing systems for the Rov...

Videos

Next-Level Operational Business Intelligence: Make Every Nanosecond of Data Count

Seeking a competitive edge to drive better business decisions? Experience how the power of real-time stream processing and visualization in the hands of those closest to the action results in smarter tactical and strategic decision making in rapid...

ATC Presentations

Using EDEM at Astec, Inc.

Andrew Hobbs, Chief DEM/CFD Engineer at Astec, Inc. shares his experience using EDEM software. He discusses what key applications he uses it for, the key benefits Astec gets from it as well as his thoughts on the future of simulation.

Customer Testimonials

Developing a 3D Printed Solid-Lattice Hip Prosthesis

Total hip replacement surgeries are seeing an increase in demand, but between 10-20% of these patients may require a revision surgery because of a failure or wearing out of the prosthesis. When an implant causes a change in the typical stresses on...

Videos

Altair One – Enable Innovation at Scale

In today's digital economy, survival and success of an organization is contingent upon the ability to digitize their business and harness the power of data to forecast the future and drive innovation across the board.

ATC Presentations

Self Service Data Transformation In The Federal Government: A Look At Criminal Investigation, Accounting, and Maintenance Analytics

Explore how Altair’s self-service data analytics platform enables federal authorities to access, generate, and use smart data to make insightful, informed decisions. We’re joined by our Solution Specialist to see how different federal government d...

Videos, Webinars

Office Of Finance - Reconciliation and Closing of the Books

This is a demonstration of using Monarch to streamline financial reconciliation tasks, ensuring that final transaction records are accurate and correct. When a number of different reports are required to reconcile records, Monarch removes laboriou...

Getting Started, Training Materials

Monarch Server Product Overview

A short overview of Monarch Server describing how the solution automates the process of cleaning blending and preparing repeatable reports.

Product Overview Videos

Altair Panopticon 2020.0: An Introduction

With Panopticon 2020.0, we have moved to a fully cloud-compatible server-based platform. All functions of the system are handled by the server and are compatible with Linux, Mac, and Windows desktop machines. Panopticon 2020’s new server-side cont...

Product Overview Videos

Extended Interview: Royal Enfield Discuss the Deployment of the Altair HyperWorks Unlimited Appliance

An extended interview with Royal Enfield, the world's oldest motorcycle brand in continuous production, as they discuss the deployment of the Altair HyperWorks Unlimited Appliance. Rod Giles gives insight into the company's existing HPC infrastruc...

Customer Testimonials

Direct Mid Meshing forTraining: Complex 2D Components Using HyperWorks New User Experience

The session will take you through the new workflow introduced to HyperMesh enables efficient mesh generation of thin solid parts without the need to create a mid-surface. The thickness of the original part can be mapped automatically on to the re...

Videos

Accelerate Decision Making with GPUs

Harnessing the computational capabilities of the graphics processing unit (GPU) is one of the cornerstones of Altair's mission to empower its customers. First and foremost, utilizing GPUs to accelerate numerical simulation delivers significant inc...

Product Overview Videos

Panopticon Demo: Real-Time Risk Monitoring in Electronic Trading Environments

On the buy-side, risk monitoring helps portfolio managers formulate new strategies for assessing performance. On the sell-side, the same tools enable traders and managers to monitor and analyze all aspects of risk throughout the trading day. Regar...

Videos

Generative Design Gallery

Watch the video to learn how Altair enables designs for production, moving additive manufacturing from an advanced capability to a production capacity with the power of simulation.

Videos

Royal Enfield Discuss the Deployment of the Altair HyperWorks Unlimited Appliance

Royal Enfield, the world's oldest motorcycle brand in continuous production, discuss the deployment of the Altair HyperWorks Unlimited Appliance. Rod Giles gives insight into the company's existing HPC infrastructure and explains why the fully man...

Customer Testimonials

Using your CAD in MapleSim

See how to import and work with your CAD model in MapleSim.

Videos

Stop Using Excel Before You Make an Expensive Error!

An engineer has an ethical duty to actively identify and minimize sources of risk. However, one significant source of risk is often ignored. That’s Microsoft Excel – a surprisingly common tool for engineering calculations. This webinar explores wh...

Videos

Introduction to Panopticon Streams: Stream Processing with No Coding

Panopticon Streams, a stream processing engine built on the popular Apache Kafka platform, enables business users to build sophisticated Kafka data flows with no coding. Streams connects directly to a wide range of streaming and historic informati...

Product Overview Videos

Introduction to Altair Feko Component LIbrary

The new Feko component library contains a set of antenna models that are ready for simulation. The library can be searched easily by keywords, and a summary is included for each component. The versatile antenna models can be scaled to frequency, a...

Product Overview Videos

What Customers Are Saying About SimSolid

Users from CNH Industrial, Multimatic, and Plastic Omnium discuss the impact of Altair SimSolid on their work.

Customer Testimonials
713 Results