Resource Library

F.tech R&D North America

F.tech is a Tier-1 automotive systems supplier, headquartered in Japan. To help the CAE team at F.tech R&D North America overcome tedious challenges related to model build and geometry preparation for weld creation, Altair developed a customized s...

Customer Stories

Integrated Design and Engineering Solutions

Melbourne-based Integrated Design and Engineering Solutions (IDES) provides full “systems-life-cycle” tailored engineering solutions to fulfill demanding defence requirements. For the LAND 121 Phase 3A project involving the procurement of Mercedes...

Customer Stories

Calculation Management with Maple

Maple is a software tool that can handle all your mathematical needs, from performing simple calculations to advanced computations, visualizations, data analysis, and algorithm development. In this video, you’ll see how Maple also helps you maximi...

Videos

SOGECLAIR aerospace

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

Unveiling the Mysteries of the Early Universe with Modern Super Radio Telescopes

Presentation by Nicolas Fagnoni, Cavendish Laboratory, University of Cambridge.

The University of Cambridge and the Cavendish Laboratory are closely involved in the design and development of two new radio-telescopes: the ‘Square Kilometre Array’ (SKA) and the ‘Hydrogen Epoch of Reionizati

ATC Presentations, Videos

Major Antennas Constraints in Helicopters

Presentation by Hervé Dutruc, Antenna and Communication Expert at Airbus Helicopters.

This presentation will highlight challenges faced by Airbus Helicopters for the antenna installation definition, considering the increase of use of composite materials and the increase of frequency for c

ATC Presentations, Videos

First-time-right Design of Matching Circuts for Complex Antenna dn RF Applications

Presentation by Jussi Rahola, CEO of Optenni.

The modern mobile phones and other wireless devices, matching circuits are commonly used to tune the antenna to operate at the desired frequencies and to broaden the operation frequency range of the antenna.

The goal of matching cir

ATC Presentations, Videos

EM Simulation for Wireless Systems and Antenna Integration on Motor Vehicles

Presentation by Dr. Ahmadreza Jafari, Radio Reception and Antenna Expert, & Phillippe Boutier, Référent RadioFréquence at Renault.

In this presentation, different examples of Renault RF simulations regarding antenna applications such as keyless entry and ignition, AM/FM/DAB radio, radar a

ATC Presentations, Videos

High Frequency Electromagnetic Simulation

In the session there are great presentations from high quality speakers from industry sectors including automotive, aviation, aerospace railway industry, as well research.
A wide variety of applications are covered, from antenna design and integration, to influences of radome structures on such sys

ATC Presentations, Videos

Non-linear Simulation and Optimization

Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Project Invincible - Advanced Chest Protection

Presentation by James Helliwell, Design Engineer at McLaren Applied Technologies.

In this presentation McLaren Applied Technologies, the advanced technology, innovation, and design company will discuss the background, design process and results of a project to develop a highly bespoke pro

ATC Presentations, Videos

Fallbrook Technologies

Traction-based, patented NuVinci® transmission is a continuously variable planetary (CVP) technology enabling performance and efficiency improvements for machines that use an engine, pump, motor, or geared transmission systems. Fallbrook Technolog...

Customer Stories

Simulation, 3D Printing, and Casting the Perfect Symbiosis for Large Aerospace Structures

Presentation by Mathieu Deloubes, Innovation Project Manager at SOGECLAIR.

Manufacturing capabilities are still restrained by the size of 3D printing machines, which makes today the technology unsuitable for larger components. Investment Casting and pattern 3D printing is an answer, with th

ATC Presentations, Videos

Optimal AM Part Design Combines Advanced Design Tools and DfAM Thinking

Presentation by Marc Saunders, Director of Global Solutions Centres at Renishaw.

Most design for additive manufacturing (DfAM) is not really worthy of the name - 'adapt to AM' would be a better description. Parts are often designed for function rather than manufacturability, requiring a f

ATC Presentations, Videos

Designing Recurring AM Products for Ariane Launchers. Pushing Technology to Industrial Applications with New Design Tools and Processes

Presentation by Marta García-Cosío, CITD HO Engineering & Additive Manufacturing at CITD.

This presentation outlines a novel design approach that gives the opportunity of reducing the number of parts comparing with the traditional design while keeping the same functionality, achieving mas

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Highly Optimized Passive Lubrication System for an EV Transmission

Presentation by Dr. Milos Stanic, nanoFluidX Product Manager at Altair.

Optimising the rotational losses of an EV transmission is essential to improve range. Whilst bearing and gear losses are well understood, the interaction between rotating components and transmission fluid rarely explo

ATC Presentations, Videos

Simulation-based Design of a Traction Battery Cooling Plate

Presentation by Frank Cord Lohmann, Project Manager at Altair.

The steady shift from conventional (combustion) powertrains to hybrid or full electric powertrains goes hand in hand with a steady increase in traction battery size, power and capacity. While passive cooling (air cooling) migh

ATC Presentations, Videos

The Role of EMC Simulation and Virtual Drive Testing in the Development of Electric and Hybrid Vehicles

Presentation by Jordi Soler, VP of Global Business Development, Electromagnetic Solutions at Altair.

Electrified, connected, autonomous and shared are four converging mobility megatrends having game-changing effects on the automotive and transportation market. These trends are like to dri

ATC Presentations, Videos

Optimization Driven Motor Design - Processes and Methodology

Presentation by Lars Fredriksson, Business VP - Simulation Driven Innovation at Altair.

This presentation offers insight how Altair has approached the challenge of improving the total design balance in E-motor development. The presented study has been executed with active support of Porsche AG.

ATC Presentations, Videos

Simulation-driven Design and Manufacturing

Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Validation: Minimizing Risk and Maximizing Part Quality

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

A cast shock-tower is used to describe the procedure for using simulation with Inspire Cast. The investigation of the gating technique related to large-area, thin-walled components is described. How can thicker sections deviating from

ATC Presentations, Videos

Introduction to Manufacturing Simulation-Driven Design

Presentation by Martin Solina, Project Manager, and Ulrich Bruder, Vice President Global Partner Sales, at Altair.

ATC Presentations, Videos

Automotive NVH Development - Past, Present, and Future Technology Challenges

Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC in Paris, France.

Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refinement process. Today CAE is a fully

ATC Presentations, Videos

Zaha Hadid Presents Innovation in AEC

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC in Paris, France.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double c

ATC Presentations, Videos

Inspire Platform Manufacturing Simulation Roadmap

Presentation by Martin Solina, Project Manager at Altair.

ATC Presentations, Videos

The Digitalization Trends and Structural Design in Maritime Industry

Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC in Paris, France.

In this presentation, the current state of digitalization of maritime industry, structural rules and evaluation software used for hull st

ATC Presentations, Videos

Introduction to GE's Flow Simulator

An introductory webinar to Flow Simulator, an integrated flow, heat transfer, and combustion design software that enables mixed fidelity simulations to optimize machine and systems design. This fluid system design tool provides interdisciplinary m...

Webinars

Vision for the Altair Academic Program

Presentation by Matthias Goelke, Senior Manager at Altair.

ATC Presentations, Videos

Innovation & New Technology Integration into Engineering Curricula

Presentation by Clive Hands from Nelson Mandela University.

A challenge facing all academic institutions teaching engineering in today’s rapidly evolving technological climate, is how to remain relevant as traditional methods of doing things are disrupted either partially or completely, by new an

ATC Presentations, Videos

Design of an Inverted Pendulum

Presentation by Nic Minnaar, Application Engineer at Altair.

ATC Presentations, Videos

The Impact of Deep Learning in CAE

Presentation by Prof. Michel Bercovier from the School of Engineering and CS, Hebrew University of Jerusalem.

Artificial Intelligence (AI) has had a bumpy history with highly fashionable periods followed by lows. Its applications in CAE , that is Mechanical Engineering and Simulations as

ATC Presentations, Videos

Teaching & Learning Simulation Driven Innovation

The focus of this seminar is on teaching and learning Simulation Driven Innovation and Altair's Academic Program. We will hear from academic leaders all over the world on how they are equipping engineering students for their future careers. Join us for an exciting and engaging program.

Pr

ATC Presentations, Videos

Fatigue with Optimization Example

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Fatigue capability within Altair OptiStruct supplemented by other HyperWorks suite of products enable users to carry out design optimization studies for Fatigue perform

ATC Presentations, Videos

Using Excel as Front-/Back-end to Compose Script for Calculating Home Heating Efficiency

Presentation by Livio Mariano, Technical Specialist, Math & Systems at Altair.

Using a realistic example of calculating home heating efficiency, learn how to leverage the interoperability between Compose and Excel to get the best of both worlds: Excel for the front-end (i.e., GUI generation

ATC Presentations, Videos

Tools for Special Applications - Composite, Rubber, and High Temperature

Presentation by Amaury Chabod, Senior Application Engineer at HBM Prensica.

ATC Presentations, Videos

Extending the Life of Products with Simulation

Fatigue and Durability seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Structural Optimization for Fatigue Performance

Presentation by Byung Soo Kang, Technical Specialist at Altair.

Design optimized for strength may not be the optimum design for Fatigue performance. This presentation goes over how structural optimization can be used to enhance fatigue performance.

ATC Presentations, Videos
1043 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!